The Expresspave Ground Reinforcement Grid is a simple legal solution for homeowners and builders wanting to use gardens for parking, replace an existing driveway or simply provide an attractive low maintenance multi-function area.
Manufactured in the UK from 100% recycled material that will not crack, corrode, rot or splinter.
Filled with attractive coloured stone, pea gravel or seeded soil, the finished aspect is aesthetically pleasing; making Expresspave particularly suitable for locations where the introduction of hard landscaping would visually impact the natural surroundings.
Migration is prevented as the frost and UV resistant Expresspave system will remain dimensionally stable in all climatic conditions. It is the ideal choice for all locations requiring erosion prevention, ground reinforcement and/or stabilization.
It is extremely versatile and being easy to cut will not impede the planting of trees and shrubbery or the inclusion of railings, fences and other physical barriers.
Since 1st October 2008, if a new driveway or parking area is constructed using a permeable surface or if any water is able to soak into the ground you will not require planning permission ( saving £150 application fee and avoiding a wait of up to 8 weeks for a decision). New rules apply to had surfaces exceeding 2 square meter in area, and also to existing hard standings that are being replaced
Grid Area 330 x 330 x 40mm
Load capacity Up to 250 tpmmers/m2
Axle weight Up to 16 tonne
Material 100% recycled UV Stable polyefin from
Temperature Stability -50 to +90º C
Chemical Resistance Sodium Chloride (rocksalt) ammonia,
Acid rain petroleum based products
Base Specifications Minimum base recommended: 250mm
For car parking. 450mm for parking heavier vehicles
Suggested Usage General purpose domestic parking,
Filling with gravel or grass filling:
Overflow parking; ground stabilisation
For footpaths, golf courses parking areas on airstrips,
banks and ditches, paddocks and farms,
high wear gateways, green roofs.